Reference

General information
Builtin rules
Builtin features
Builtin tools
Build process
Definitions

General information

Initialization

Initialization

bjam's first job upon startup is to load the Jam code that implements the build system. To do this, it searches for a file called boost-build.jam, first in the invocation directory, then in its parent and so forth up to the filesystem root, and finally in the directories specified by the environment variable BOOST_BUILD_PATH. When found, the file is interpreted, and should specify the build system location by calling the boost-build rule:

rule boost-build ( location ? )

If location is a relative path, it is treated as relative to the directory of boost-build.jam. The directory specified by that location and the directories in BOOST_BUILD_PATH are then searched for a file called bootstrap.jam, which is expected to bootstrap the build system. This arrangement allows the build system to work without any command-line or environment variable settings. For example, if the build system files were located in a directory "build-system/" at your project root, you might place a boost-build.jam at the project root containing:

boost-build build-system ;

In this case, running bjam anywhere in the project tree will automatically find the build system.

The default bootstrap.jam, after loading some standard definitions, loads two site-config.jam and user-config.jam.

Builtin rules

This section contains the list of all rules that can be used in Jamfile—both rules that define new targets and auxiliary rules.

exe

Creates an executable file. See the section called “Programs”.

lib

Creates an library file. See the section called “Libraries”.

install

Installs built targets and other files. See the section called “Installing”.

alias

Creates an alias for other targets. See the section called “Alias”.

unit-test

Creates an executable that will be automatically run. See the section called “Testing”.

compile, compile-fail, link, link-fail, run, run-fail

Specialized rules for testing. See the section called “Testing”.

obj

Creates an object file. Useful when a single source file must be compiled with special properties.

preprocessed

Creates an preprocessed source file. The arguments follow the common syntax.

glob

The glob rule takes a list shell pattern and returns the list of files in the project's source directory that match the pattern. For example:

lib tools : [ glob *.cpp ] ;

It is possible to also pass a second argument—the list of exclude patterns. The result will then include the list of files patching any of include patterns, and not matching any of the exclude patterns. For example:

lib tools : [ glob *.cpp : file_to_exclude.cpp bad*.cpp ] ;

glob-tree

The glob-tree is similar to the glob except that it operates recursively from the directory of the containing Jamfile. For example:

ECHO [ glob-tree *.cpp : .svn ] ;

will print the names of all C++ files in your project. The .svn exclude pattern prevents the glob-tree rule from entering administrative directories of the Subversion version control system.

project

Declares project id and attributes, including project requirements. See the section called “Projects”.

use-project

Assigns a symbolic project ID to a project at a given path. This rule must be better documented!

explicit

The explicit rule takes a single parameter—a list of target names. The named targets will be marked explicit, and will be built only if they are explicitly requested on the command line, or if their dependents are built. Compare this to ordinary targets, that are built implicitly when their containing project is built.

always

The always funciton takes a single parameter—a list of metatarget names. The top-level targets produced by the named metatargets will be always considered out of date. Consider this example:

exe hello : hello.cpp ;
exe bye : bye.cpp ;
always hello ;

If a build of hello is requested, then the binary will always be relinked. The object files will not be recompiled, though. Note that if a build of hello is not requested, for example you specify just bye on the command line, hello will not be relinked.

constant

Sets project-wide constant. Takes two parameters: variable name and a value and makes the specified variable name accessible in this Jamfile and any child Jamfiles. For example:

constant VERSION : 1.34.0 ;

path-constant

Same as constant except that the value is treated as path relative to Jamfile location. For example, if bjam is invoked in the current directory, and Jamfile in helper subdirectory has:

path-constant DATA : data/a.txt ;

then the variable DATA will be set to helper/data/a.txt, and if bjam is invoked from the helper directory, then the variable DATA will be set to data/a.txt.

build-project

Cause some other project to be built. This rule takes a single parameter—a directory name relative to the containing Jamfile. When the containing Jamfile is built, the project located at that directory will be built as well. At the moment, the parameter to this rule should be a directory name. Project ID or general target references are not allowed.

test-suite

This rule is deprecated and equivalent to alias.

Builtin features

This section documents the features that are built-in into Boost.Build. For features with a fixed set of values, that set is provided, with the default value listed first.

variant

A feature combining several low-level features, making it easy to request common build configurations.

Allowed values: debug, release, profile.

The value debug expands to

<optimization>off <debug-symbols>on <inlining>off <runtime-debugging>on

The value release expands to

<optimization>speed <debug-symbols>off <inlining>full <runtime-debugging>off

The value profile expands to the same as release, plus:

<profiling>on <debug-symbols>on

Users can define their own build variants using the variant rule from the common module.

Note: Runtime debugging is on in debug builds to suit the expectations of people used to various IDEs.

link

Allowed values: shared, static

A feature controling how libraries are built.

runtime-link

Allowed values: shared, static

Controls if a static or shared C/C++ runtime should be used. There are some restrictions how this feature can be used, for example on some compilers an application using static runtime should not use shared libraries at all, and on some compilers, mixing static and shared runtime requires extreme care. Check your compiler documentation for more details.

threading

Allowed values: single, multi

Controls if the project should be built in multi-threaded mode. This feature does not necessary change code generation in the compiler, but it causes the compiler to link to additional or different runtime libraries, and define additional preprocessor symbols (for example, _MT on Windows and _REENTRANT on Linux). How those symbols affect the compiled code depends on the code itself.

source

The <source>X feature has the same effect on building a target as putting X in the list of sources. It is useful when you want to add the same source to all targets in the project (you can put <source> in requirements) or to conditionally include a source (using conditional requirements, see the section called “Conditions and alternatives”). See also the

<library>

feature.

library

This feature is almost equivalent to the <source> feature, except that it takes effect only for linking. When you want to link all targets in a Jamfile to certain library, the <library> feature is preferred over <source>X -- the latter will add the library to all targets, even those that have nothing to do with libraries.

dependency

Introduces a dependency on the target named by the value of this feature (so it will be brought up-to-date whenever the target being declared is). The dependency is not used in any other way.

use

Introduces a dependency on the target named by the value of this feature (so it will be brought up-to-date whenever the target being declared is), and adds its usage requirements to the build properties of the target being declared. The dependency is not used in any other way. The primary use case is when you want the usage requirements (such as #include paths) of some library to be applied, but do not want to link to it.

dll-path

Specify an additional directory where the system should look for shared libraries when the executable or shared library is run. This feature only affects Unix compilers. Plase see the section called “ Why are the dll-path and

hardcode-dll-paths

properties useful? ” in the section called “Frequently Asked Questions” for details.

hardcode-dll-paths

Controls automatic generation of dll-path properties.

Allowed values: true, false. This property is specific to Unix systems. If an executable is built with <hardcode-dll-paths>true, the generated binary will contain the list of all the paths to the used shared libraries. As the result, the executable can be run without changing system paths to shared libraries or installing the libraries to system paths. This is very convenient during development. Plase see the FAQ entry for details. Note that on Mac OSX, the paths are unconditionally hardcoded by the linker, and it is not possible to disable that behaviour.

cflags, cxxflags, linkflags

The value of those features is passed without modification to the corresponding tools. For cflags that is both the C and C++ compilers, for cxxflags that is the C++ compiler and for linkflags that is the linker. The features are handy when you are trying to do something special that cannot be achieved by a higher-level feature in Boost.Build.

include

Specifies an additional include path that is to be passed to C and C++ compilers.

define

Specifies an preprocessor symbol that should be defined on the command line. You may either specify just the symbol, which will be defined without any value, or both the symbol and the value, separated by equal sign.

warnings

The <warnings> feature controls the warning level of compilers. It has the following values:

off - disables all warnings.
on - enables default warning level for the tool.
all - enables all warnings.

Default value is all.

warnings-as-errors

The <warnings-as-errors> makes it possible to treat warnings as errors and abort compilation on a warning. The value on enables this behaviour. The default value is off.

build

Allowed values: no

The build feature is used to conditionally disable build of a target. If <build>no is in properties when building a target, build of that target is skipped. Combined with conditional requirements this allows you to skip building some target in configurations where the build is known to fail.

tag

The tag feature is used to customize the name of the generated files. The value should have the form:

@rulename

where rulename should be a name of a rule with the following signature:

rule tag ( name : type ? : property-set )

The rule will be called for each target with the default name computed by Boost.Build, the type of the target, and property set. The rule can either return a string that must be used as the name of the target, or an empty string, in which case the default name will be used.

Most typical use of the tag feature is to encode build properties, or library version in library target names. You should take care to return non-empty string from the tag rule only for types you care about — otherwise, you might end up modifying names of object files, generated header file and other targets for which changing names does not make sense.

debug-symbols

Allowed values: on, off.

The debug-symbols feature specifies if produced object files, executables and libraries should include debug information. Typically, the value of this feature is implicitly set by the variant feature, but it can be explicitly specified by the user. The most common usage is to build release variant with debugging information.

target-os

The operating system for which the code is to be generated. The compiler you used should be the compiler for that operating system. This option causes Boost.Build to use naming conventions suitable for that operating system, and adjust build process accordingly. For example, with gcc, it controls if import libraries are produced for shared libraries or not.

The complete list of possible values for this feature is: aix, bsd, cygwin, darwin, freebsd, hpux, iphone, linux, netbsd, openbsd, osf, qnx, qnxnto, sgi, solaris, unix, unixware, windows.

See the section called “Cross-compilation” for details of crosscompilation

architecture

The architecture features specifies the general processor familty to generate code for.

instruction-set

Allowed values: depend on the used toolset.

The instruction-set specifies for which specific instruction set the code should be generated. The code in general might not run on processors with older/different instruction sets.

While Boost.Build allows a large set of possible values for this features, whether a given value works depends on which compiler you use. Please see the section called “C++ Compilers” for details.

address-model

Allowed values: 32, 64.

The address-model specifies if 32-bit or 64-bit code should be generated by the compiler. Whether this feature works depends on the used compiler, its version, how the compiler is configured, and the values of the architecture instruction-set features. Please see the section called “C++ Compilers” for details.

c++-template-depth

Allowed values: Any positive integer.

This feature allows configuring a C++ compiler with the maximal template instantiation depth parameter. Specific toolsets may or may not provide support for this feature depending on whether their compilers provide a corresponding command-line option.

Note: Due to some internal details in the current Boost Build implementation it is not possible to have features whose valid values are all positive integer. As a workaround a large set of allowed values has been defined for this feature and, if a different one is needed, user can easily add it by calling the feature.extend rule.

embed-manifest

Allowed values: on, off.

This feature is specific to the msvc toolset (see the section called “Microsoft Visual C++”), and controls whether the manifest files should be embedded inside executables and shared libraries, or placed alongside them. This feature corresponds to the IDE option found in the project settings dialog, under Configuration Properties → Manifest Tool → Input and Output → Embed manifest.

Builtin tools

C++ Compilers
Third-party libraries
Documentation tools

Boost.Build comes with support for a large number of C++ compilers, and other tools. This section documents how to use those tools.

Before using any tool, you must declare your intention, and possibly specify additional information about the tool's configuration. This is done by calling the using rule, typically in your user-config.jam, for example:

using gcc ;

additional parameters can be passed just like for other rules, for example:

using gcc : 4.0 : g++-4.0 ;

The options that can be passed to each tool are documented in the subsequent sections.

C++ Compilers

GNU C++
Apple Darwin gcc
Microsoft Visual C++
Intel C++
HP aC++ compiler
Borland C++ Compiler
Comeau C/C++ Compiler
Code Warrior
Digital Mars C/C++ Compiler
HP C++ Compiler for Tru64 Unix
Sun Studio
IBM Visual Age

This section lists all Boost.Build modules that support C++ compilers and documents how each one can be initialized. The name of support module for compiler is also the value for the toolset feature that can be used to explicitly request that compiler.

GNU C++

The gcc module supports the GNU C++ compiler on Linux, a number of Unix-like system including SunOS and on Windows (either Cygwin or MinGW). On Mac OSX, it is recommended to use system gcc, see the section called “Apple Darwin gcc”.

The gcc module is initialized using the following syntax:

using gcc : [version] : [c++-compile-command] : [compiler options] ;

This statement may be repeated several times, if you want to configure several versions of the compiler.

If the version is not explicitly specified, it will be automatically detected by running the compiler with the -v option. If the command is not specified, the g++ binary will be searched in PATH.

The following options can be provided, using <option-name>option-value syntax:

cflags: Specifies additional compiler flags that will be used when compiling C sources.
cxxflags: Specifies additional compiler flags that will be used when compiling C++ sources.
compileflags: Specifies additional compiler flags that will be used when compiling both C and C++ sources.
linkflags: Specifies additional command line options that will be passed to the linker.
root: Specifies root directory of the compiler installation. This option is necessary only if it is not possible to detect this information from the compiler command—for example if the specified compiler command is a user script.
rc: Specifies the resource compiler command that will be used with the version of gcc that is being configured. This setting makes sense only for Windows and only if you plan to use resource files. By default windres will be used.
rc-type: Specifies the type of resource compiler. The value can be either windres for msvc resource compiler, or rc for borland's resource compiler.

In order to compile 64-bit applications, you have to specify address-model=64, and the instruction-set feature should refer to a 64 bit processor. Currently, those include nocona, opteron, athlon64 and athlon-fx.

Apple Darwin gcc

The darwin module supports the version of gcc that is modified and provided by Apple. The configuration is essentially identical to that of the gcc module.

The darwin toolset can generate so called "fat" binaries—binaries that can run support more than one architecture, or address mode. To build a binary that can run both on Intel and PowerPC processors, specify architecture=combined. To build a binary that can run both in 32-bit and 64-bit modes, specify address-model=32_64. If you specify both of those properties, a "4-way" fat binary will be generated.

Microsoft Visual C++

The msvc module supports the Microsoft Visual C++ command-line tools on Microsoft Windows. The supported products and versions of command line tools are listed below:

Visual Studio 2010—10.0
Visual Studio 2008—9.0
Visual Studio 2005—8.0
Visual Studio .NET 2003—7.1
Visual Studio .NET—7.0
Visual Studio 6.0, Service Pack 5—6.5

The msvc module is initialized using the following syntax:

using msvc : [version] : [c++-compile-command] : [compiler options] ;

This statement may be repeated several times, if you want to configure several versions of the compiler.

If the version is not explicitly specified, the most recent version found in the registry will be used instead. If the special value all is passed as the version, all versions found in the registry will be configured. If a version is specified, but the command is not, the compiler binary will be searched in standard installation paths for that version, followed by PATH.

The compiler command should be specified using forward slashes, and quoted.

The following options can be provided, using <option-name>option-value syntax:

cflags: Specifies additional compiler flags that will be used when compiling C sources.
cxxflags: Specifies additional compiler flags that will be used when compiling C++ sources.
compileflags: Specifies additional compiler flags that will be used when compiling both C and C++ sources.
linkflags: Specifies additional command line options that will be passed to the linker.
assembler: The command that compiles assembler sources. If not specified, ml will be used. The command will be invoked after the setup script was executed and adjusted the PATH variable.
compiler: The command that compiles C and C++ sources. If not specified, cl will be used. The command will be invoked after the setup script was executed and adjusted the PATH variable.
compiler-filter: Command through which to pipe the output of running the compiler. For example to pass the output to STLfilt.
idl-compiler: The command that compiles Microsoft COM interface definition files. If not specified, midl will be used. The command will be invoked after the setup script was executed and adjusted the PATH variable.
linker: The command that links executables and dynamic libraries. If not specified, link will be used. The command will be invoked after the setup script was executed and adjusted the PATH variable.
mc-compiler: The command that compiles Microsoft message catalog files. If not specified, mc will be used. The command will be invoked after the setup script was executed and adjusted the PATH variable.
resource-compiler: The command that compiles resource files. If not specified, rc will be used. The command will be invoked after the setup script was executed and adjusted the PATH variable.
setup: The filename of the global environment setup script to run before invoking any of the tools defined in this toolset. Will not be used in case a target platform specific script has been explicitly specified for the current target platform. Used setup script will be passed the target platform identifier (x86, x86_amd64, x86_ia64, amd64 or ia64) as a arameter. If not specified a default script is chosen based on the used compiler binary, e.g. vcvars32.bat or vsvars32.bat.
setup-amd64, setup-i386, setup-ia64: The filename of the target platform specific environment setup script to run before invoking any of the tools defined in this toolset. If not specified the global environment setup script is used.

64-bit support

Starting with version 8.0, Microsoft Visual Studio can generate binaries for 64-bit processor, both 64-bit flavours of x86 (codenamed AMD64/EM64T), and Itanium (codenamed IA64). In addition, compilers that are itself run in 64-bit mode, for better performance, are provided. The complete list of compiler configurations are as follows (we abbreviate AMD64/EM64T to just AMD64):

32-bit x86 host, 32-bit x86 target
32-bit x86 host, 64-bit AMD64 target
32-bit x86 host, 64-bit IA64 target
64-bit AMD64 host, 64-bit AMD64 target
64-bit IA64 host, 64-bit IA64 target

The 32-bit host compilers can be always used, even on 64-bit Windows. On the contrary, 64-bit host compilers require both 64-bit host processor and 64-bit Windows, but can be faster. By default, only 32-bit host, 32-bit target compiler is installed, and additional compilers need to be installed explicitly.

To use 64-bit compilation you should:

Configure you compiler as usual. If you provide a path to the compiler explicitly, provide the path to the 32-bit compiler. If you try to specify the path to any of 64-bit compilers, configuration will not work.
When compiling, use address-model=64, to generate AMD64 code.
To generate IA64 code, use architecture=ia64

The (AMD64 host, AMD64 target) compiler will be used automatically when you are generating AMD64 code and are running 64-bit Windows on AMD64. The (IA64 host, IA64 target) compiler will never be used, since nobody has an IA64 machine to test.

It is believed that AMD64 and EM64T targets are essentially compatible. The compiler options /favor:AMD64 and /favor:EM64T, which are accepted only by AMD64 targeting compilers, cause the generated code to be tuned to a specific flavor of 64-bit x86. Boost.Build will make use of those options depending on the value of theinstruction-set feature.

Intel C++

The intel-linux and intel-win modules support the Intel C++ command-line compiler—the Linux and Windows versions respectively.

The module is initialized using the following syntax:

using intel-linux : [version] : [c++-compile-command] : [compiler options] ;

using intel-win : [version] : [c++-compile-command] : [compiler options] ;

respectively.

This statement may be repeated several times, if you want to configure several versions of the compiler.

If compiler command is not specified, then Boost.Build will look in PATH for an executable icpc (on Linux), or icc.exe (on Windows).

The following options can be provided, using <option-name>option-value syntax:

cflags: Specifies additional compiler flags that will be used when compiling C sources.
cxxflags: Specifies additional compiler flags that will be used when compiling C++ sources.
compileflags: Specifies additional compiler flags that will be used when compiling both C and C++ sources.
linkflags: Specifies additional command line options that will be passed to the linker.

The Linux version supports the following additional options:

root: Specifies root directory of the compiler installation. This option is necessary only if it is not possible to detect this information from the compiler command—for example if the specified compiler command is a user script.

HP aC++ compiler

The acc module supports the HP aC++ compiler for the HP-UX operating system.

The module is initialized using the following syntax:

using acc : [version] : [c++-compile-command] : [compiler options] ;

This statement may be repeated several times, if you want to configure several versions of the compiler.

If the command is not specified, the aCC binary will be searched in PATH.

The following options can be provided, using <option-name>option-value syntax:

cflags: Specifies additional compiler flags that will be used when compiling C sources.
cxxflags: Specifies additional compiler flags that will be used when compiling C++ sources.
compileflags: Specifies additional compiler flags that will be used when compiling both C and C++ sources.
linkflags: Specifies additional command line options that will be passed to the linker.

Borland C++ Compiler

The borland module supports the command line C++ compiler included in C++ Builder 2006 product and earlier version of it, running on Microsoft Windows.

The supported products are listed below. The version reported by the command lines tools is also listed for reference.:

C++ Builder 2006—5.8.2
CBuilderX—5.6.5, 5.6.4 (depending on release)
CBuilder6—5.6.4
Free command line tools—5.5.1

The module is initialized using the following syntax:

using borland : [version] : [c++-compile-command] : [compiler options] ;

This statement may be repeated several times, if you want to configure several versions of the compiler.

If the command is not specified, Boost.Build will search for a binary named bcc32 in PATH.

The following options can be provided, using <option-name>option-value syntax:

cflags: Specifies additional compiler flags that will be used when compiling C sources.
cxxflags: Specifies additional compiler flags that will be used when compiling C++ sources.
compileflags: Specifies additional compiler flags that will be used when compiling both C and C++ sources.
linkflags: Specifies additional command line options that will be passed to the linker.

Comeau C/C++ Compiler

The como-linux and the como-win modules supports the Comeau C/C++ Compiler on Linux and Windows respectively.

The module is initialized using the following syntax:

using como-linux : [version] : [c++-compile-command] : [compiler options] ;

This statement may be repeated several times, if you want to configure several versions of the compiler.

If the command is not specified, Boost.Build will search for a binary named como in PATH.

The following options can be provided, using <option-name>option-value syntax:

cflags: Specifies additional compiler flags that will be used when compiling C sources.
cxxflags: Specifies additional compiler flags that will be used when compiling C++ sources.
compileflags: Specifies additional compiler flags that will be used when compiling both C and C++ sources.
linkflags: Specifies additional command line options that will be passed to the linker.

Before using the Windows version of the compiler, you need to setup necessary environment variables per compiler's documentation. In particular, the COMO_XXX_INCLUDE variable should be set, where XXX corresponds to the used backend C compiler.

Code Warrior

The cw module support CodeWarrior compiler, originally produced by Metrowerks and presently developed by Freescale. Boost.Build supports only the versions of the compiler that target x86 processors. All such versions were released by Metrowerks before aquisition and are not sold any longer. The last version known to work is 9.4.

The module is initialized using the following syntax:

using cw : [version] : [c++-compile-command] : [compiler options] ;

This statement may be repeated several times, if you want to configure several versions of the compiler.

If the command is not specified, Boost.Build will search for a binary named mwcc in default installation paths and in PATH.

The following options can be provided, using <option-name>option-value syntax:

cflags: Specifies additional compiler flags that will be used when compiling C sources.
cxxflags: Specifies additional compiler flags that will be used when compiling C++ sources.
compileflags: Specifies additional compiler flags that will be used when compiling both C and C++ sources.
linkflags: Specifies additional command line options that will be passed to the linker.
root: Specifies root directory of the compiler installation. This option is necessary only if it is not possible to detect this information from the compiler command—for example if the specified compiler command is a user script.
setup: The command that sets up environment variables prior to invoking the compiler. If not specified, cwenv.bat alongside the compiler binary will be used.
compiler: The command that compiles C and C++ sources. If not specified, mwcc will be used. The command will be invoked after the setup script was executed and adjusted the PATH variable.
linker: The command that links executables and dynamic libraries. If not specified, mwld will be used. The command will be invoked after the setup script was executed and adjusted the PATH variable.

Digital Mars C/C++ Compiler

The dmc module supports the Digital Mars C++ compiler.

The module is initialized using the following syntax:

using dmc : [version] : [c++-compile-command] : [compiler options] ;

This statement may be repeated several times, if you want to configure several versions of the compiler.

If the command is not specified, Boost.Build will search for a binary named dmc in PATH.

The following options can be provided, using <option-name>option-value syntax:

cflags: Specifies additional compiler flags that will be used when compiling C sources.
cxxflags: Specifies additional compiler flags that will be used when compiling C++ sources.
compileflags: Specifies additional compiler flags that will be used when compiling both C and C++ sources.
linkflags: Specifies additional command line options that will be passed to the linker.

HP C++ Compiler for Tru64 Unix

The hp_cxx modules supports the HP C++ Compiler for Tru64 Unix.

The module is initialized using the following syntax:

using hp_cxx : [version] : [c++-compile-command] : [compiler options] ;

This statement may be repeated several times, if you want to configure several versions of the compiler.

If the command is not specified, Boost.Build will search for a binary named hp_cxx in PATH.

The following options can be provided, using <option-name>option-value syntax:

cflags: Specifies additional compiler flags that will be used when compiling C sources.
cxxflags: Specifies additional compiler flags that will be used when compiling C++ sources.
compileflags: Specifies additional compiler flags that will be used when compiling both C and C++ sources.
linkflags: Specifies additional command line options that will be passed to the linker.

Sun Studio

The sun module supports the Sun Studio C++ compilers for the Solaris OS.

The module is initialized using the following syntax:

using sun : [version] : [c++-compile-command] : [compiler options] ;

This statement may be repeated several times, if you want to configure several versions of the compiler.

If the command is not specified, Boost.Build will search for a binary named CC in /opt/SUNWspro/bin and in PATH.

When using this compiler on complex C++ code, such as the Boost C++ library, it is recommended to specify the following options when intializing the sun module:

-library=stlport4 -features=tmplife -features=tmplrefstatic

See the Sun C++ Frontend Tales for details.

The following options can be provided, using <option-name>option-value syntax:

cflags: Specifies additional compiler flags that will be used when compiling C sources.
cxxflags: Specifies additional compiler flags that will be used when compiling C++ sources.
compileflags: Specifies additional compiler flags that will be used when compiling both C and C++ sources.
linkflags: Specifies additional command line options that will be passed to the linker.

Starting with Sun Studio 12, you can create 64-bit applications by using the address-model=64 property.

IBM Visual Age

The vacpp module supports the IBM Visual Age C++ Compiler, for the AIX operating system. Versions 7.1 and 8.0 are known to work.

The module is initialized using the following syntax:

using vacpp ;

The module does not accept any initialization options. The compiler should be installed in the /usr/vacpp/bin directory.

Later versions of Visual Age are known as XL C/C++. They were not tested with the the vacpp module.

Third-party libraries

STLport library

Boost.Build provides special support for some third-party C++ libraries, documented below.

STLport library

The STLport library is an alternative implementation of C++ runtime library. Boost.Build supports using that library on Windows platfrom. Linux is hampered by different naming of libraries in each STLport version and is not officially supported.

Before using STLport, you need to configure it in user-config.jam using the following syntax:

using stlport : [version] : header-path : [library-path] ;

Where version is the version of STLport, for example 5.1.4, headers is the location where STLport headers can be found, and libraries is the location where STLport libraries can be found. The version should always be provided, and the library path should be provided if you're using STLport's implementation of iostreams. Note that STLport 5.* always uses its own iostream implementation, so the library path is required.

When STLport is configured, you can build with STLport by requesting stdlib=stlport on the command line.

Documentation tools

xsltproc
boostbook
doxygen
quickbook
fop

Boost.Build support for the Boost documentation tools is documented below.

xsltproc

To use xsltproc, you first need to configure it using the following syntax:

using xsltproc : [xsltproc] ;

Where xsltproc is the xsltproc executable. If xsltproc is not specified, and the variable XSLTPROC is set, the value of XSLTPROC will be used. Otherwise, xsltproc will be searched for in PATH.

The following options can be provided, using <option-name>option-value syntax:

xsl:param: Values should have the form name=value
xsl:path: Sets an additional search path for xi:include elements.
catalog: A catalog file used to rewrite remote URL's to a local copy.

The xsltproc module provides the following rules. Note that these operate on jam targets and are intended to be used by another toolset, such as boostbook, rather than directly by users.

xslt

rule xslt ( target : source stylesheet : properties * )

Runs xsltproc to create a single output file.

xslt-dir

rule xslt-dir ( target : source stylesheet : properties * : dirname )

Runs xsltproc to create multiple outputs in a directory. dirname is unused, but exists for historical reasons. The output directory is determined from the target.

boostbook

To use boostbook, you first need to configure it using the following syntax:

using boostbook : [docbook-xsl-dir] : [docbook-dtd-dir] : [boostbook-dir] ;

docbook-xsl-dir is the DocBook XSL stylesheet directory. If not provided, we use DOCBOOK_XSL_DIR from the environment (if available) or look in standard locations. Otherwise, we let the XML processor load the stylesheets remotely.

docbook-dtd-dir is the DocBook DTD directory. If not provided, we use DOCBOOK_DTD_DIR From the environment (if available) or look in standard locations. Otherwise, we let the XML processor load the DTD remotely.

boostbook-dir is the BoostBook directory with the DTD and XSL subdirs.

The boostbook module depends on xsltproc. For pdf or ps output, it also depends on fop.

The following options can be provided, using <option-name>option-value syntax:

format

Allowed values: html, xhtml, htmlhelp, onehtml, man, pdf, ps, docbook, fo, tests.

The format feature determines the type of output produced by the boostbook rule.

The boostbook module defines a rule for creating a target following the common syntax.

boostbook

rule boostbook ( target-name : sources * : requirements * : default-build * )

Creates a boostbook target.

doxygen

To use doxygen, you first need to configure it using the following syntax:

using doxygen : [name] ;

name is the doxygen command. If it is not specified, it will be found in the PATH.

The doxygen module depends on the boostbook module when generating BoostBook XML.

The following options can be provided, using <option-name>option-value syntax:

doxygen:param

All the values of doxygen:param are added to the doxyfile.

prefix

Specifies the common prefix of all headers when generating BoostBook XML. Everything before this will be stripped off.

reftitle

Specifies the title of the library-reference section, when generating BoostBook XML.

doxygen:xml-imagedir

When generating BoostBook XML, specifies the directory in which to place the images generated from LaTex formulae.

	Warning
	The path is interpreted relative to the current working directory, not relative to the Jamfile. This is necessary to match the behavior of BoostBook.

The doxygen module defines a rule for creating a target following the common syntax.

doxygen

rule doxygen ( target : sources * : requirements * : default-build * : usage-requirements * )

Creates a doxygen target. If the target name ends with .html, then this will generate an html directory. Otherwise it will generate BoostBook XML.

quickbook

The quickbook module provides a generator to convert from Quickbook to BoostBook XML.

To use quickbook, you first need to configure it using the following syntax:

using quickbook : [command] ;

command is the quickbook executable. If it is not specified, Boost.Build will compile it from source. If it is unable to find the source it will search for a quickbook executable in PATH.

fop

The fop module provides generators to convert from XSL formatting objects to Postscript and PDF.

To use fop, you first need to configure it using the following syntax:

using fop : [fop-command] : [java-home] : [java] ;

fop-command is the command to run fop. If it is not specified, Boost.Build will search for it in PATH and FOP_HOME.

Either java-home or java can be used to specify where to find java.

Build process

Alternative selection
Determining common properties

The general overview of the build process was given in the user documentation. This section provides additional details, and some specific rules.

To recap, building a target with specific properties includes the following steps:

applying default build,
selecting the main target alternative to use,
determining "common" properties,
building targets referred by the sources list and dependency properties,
adding the usage requirements produces when building dependencies to the "common" properties,
building the target using generators,
computing the usage requirements to be returned.

Alternative selection

When there are several alternatives, one of them must be selected. The process is as follows:

For each alternative condition is defined as the set of base properties in requirements. [Note: it might be better to specify the condition explicitly, as in conditional requirements].
An alternative is viable only if all properties in condition are present in build request.
If there's one viable alternative, it's choosen. Otherwise, an attempt is made to find one best alternative. An alternative a is better than another alternative b, iff the set of properties in b's condition is a strict subset of the set of properities of 'a's condition. If there's one viable alternative, which is better than all others, it's selected. Otherwise, an error is reported.

Determining common properties

The "common" properties is a somewhat artificial term. Those are the intermediate property set from which both the build request for dependencies and properties for building the target are derived.

Since default build and alternatives are already handled, we have only two inputs: build requests and requirements. Here are the rules about common properties.

Non-free feature can have only one value
A non-conditional property in requirement in always present in common properties.
A property in build request is present in common properties, unless (2) tells otherwise.
If either build request, or requirements (non-conditional or conditional) include an expandable property (either composite, or property with specified subfeature value), the behaviour is equivalent to explicitly adding all expanded properties to build request or requirements.
If requirements include a conditional property, and condiiton of this property is true in context of common properties, then the conditional property should be in common properties as well.
If no value for a feature is given by other rules here, it has default value in common properties.

Those rules are declarative, they don't specify how to compute the common properties. However, they provide enough information for the user. The important point is the handling of conditional requirements. The condition can be satisfied either by property in build request, by non-conditional requirements, or even by another conditional property. For example, the following example works as expected:

exe a : a.cpp
      : <toolset>gcc:<variant>release
        <variant>release:<define>FOO ;

Definitions

Features and properties
Build Variants
Property refinement
Conditional properties
Target identifiers and references

Features and properties

Property Validity
Feature Attributes
Feature Declaration

A feature is a normalized (toolset-independent) aspect of a build configuration, such as whether inlining is enabled. Feature names may not contain the '>' character.

Each feature in a build configuration has one or more associated values. Feature values for non-free features may not contain the '<', ':', or '=' characters. Feature values for free features may not contain the '<' character.

A property is a (feature,value) pair, expressed as <feature>value.

A subfeature is a feature that only exists in the presence of its parent feature, and whose identity can be derived (in the context of its parent) from its value. A subfeature's parent can never be another subfeature. Thus, features and their subfeatures form a two-level hierarchy.

A value-string for a feature F is a string of the form value-subvalue1-subvalue2...-subvalueN, where value is a legal value for F and subvalue1...subvalueN are legal values of some of F's subfeatures. For example, the properties <toolset>gcc <toolset-version>3.0.1 can be expressed more conscisely using a value-string, as <toolset>gcc-3.0.1.

A property set is a set of properties (i.e. a collection without duplicates), for instance: <toolset>gcc <runtime-link>static.

A property path is a property set whose elements have been joined into a single string separated by slashes. A property path representation of the previous example would be <toolset>gcc/<runtime-link>static.

A build specification is a property set that fully describes the set of features used to build a target.

Property Validity

For free features, all values are valid. For all other features, the valid values are explicitly specified, and the build system will report an error for the use of an invalid feature-value. Subproperty validity may be restricted so that certain values are valid only in the presence of certain other subproperties. For example, it is possible to specify that the <gcc-target>mingw property is only valid in the presence of <gcc-version>2.95.2.

Feature Attributes

Each feature has a collection of zero or more of the following attributes. Feature attributes are low-level descriptions of how the build system should interpret a feature's values when they appear in a build request. We also refer to the attributes of properties, so that an incidental property, for example, is one whose feature has the incidental attribute.

incidental

Incidental features are assumed not to affect build products at all. As a consequence, the build system may use the same file for targets whose build specification differs only in incidental features. A feature that controls a compiler's warning level is one example of a likely incidental feature.

Non-incidental features are assumed to affect build products, so the files for targets whose build specification differs in non-incidental features are placed in different directories as described in "target paths" below. [ where? ]
propagated

Features of this kind are propagated to dependencies. That is, if a main target is built using a propagated property, the build systems attempts to use the same property when building any of its dependencies as part of that main target. For instance, when an optimized exectuable is requested, one usually wants it to be linked with optimized libraries. Thus, the <optimization> feature is propagated.
free

Most features have a finite set of allowed values, and can only take on a single value from that set in a given build specification. Free features, on the other hand, can have several values at a time and each value can be an arbitrary string. For example, it is possible to have several preprocessor symbols defined simultaneously:
```
<define>NDEBUG=1 <define>HAS_CONFIG_H=1
```
optional

An optional feature is a feature that is not required to appear in a build specification. Every non-optional non-free feature has a default value that is used when a value for the feature is not otherwise specified, either in a target's requirements or in the user's build request. [A feature's default value is given by the first value listed in the feature's declaration. -- move this elsewhere - dwa]
symmetric

A symmetric feature's default value is not automatically included in build variants. Normally a feature only generates a subvariant directory when its value differs from the value specified by the build variant, leading to an assymmetric subvariant directory structure for certain values of the feature. A symmetric feature, when relevant to the toolset, always generates a corresponding subvariant directory.
path

The value of a path feature specifies a path. The path is treated as relative to the directory of Jamfile where path feature is used and is translated appropriately by the build system when the build is invoked from a different directory
implicit

Values of implicit features alone identify the feature. For example, a user is not required to write "<toolset>gcc", but can simply write "gcc". Implicit feature names also don't appear in variant paths, although the values do. Thus: bin/gcc/... as opposed to bin/toolset-gcc/.... There should typically be only a few such features, to avoid possible name clashes.
composite

Composite features actually correspond to groups of properties. For example, a build variant is a composite feature. When generating targets from a set of build properties, composite features are recursively expanded and added to the build property set, so rules can find them if necessary. Non-composite non-free features override components of composite features in a build property set.
dependency

The value of a dependency feature is a target reference. When used for building of a main target, the value of dependency feature is treated as additional dependency.

For example, dependency features allow to state that library A depends on library B. As the result, whenever an application will link to A, it will also link to B. Specifying B as dependency of A is different from adding B to the sources of A.

Features that are neither free nor incidental are called base features.

Feature Declaration

The low-level feature declaration interface is the feature rule from the feature module:

rule feature ( name : allowed-values * : attributes * )

A feature's allowed-values may be extended with the feature.extend rule.

Build Variants

A build variant, or (simply variant) is a special kind of composite feature that automatically incorporates the default values of features that . Typically you'll want at least two separate variants: one for debugging, and one for your release code. [ Volodya says: "Yea, we'd need to mention that it's a composite feature and describe how they are declared, in pacticular that default values of non-optional features are incorporated into build variant automagically. Also, do we wan't some variant inheritance/extension/templates. I don't remember how it works in V1, so can't document this for V2.". Will clean up soon -DWA ]

Property refinement

When a target with certain properties is requested, and that target requires some set of properties, it is needed to find the set of properties to use for building. This process is called property refinement and is performed by these rules

Each property in the required set is added to the original property set
If the original property set includes property with a different value of non free feature, that property is removed.

Conditional properties

Sometime it's desirable to apply certain requirements only for a specific combination of other properties. For example, one of compilers that you use issues a pointless warning that you want to suppress by passing a command line option to it. You would not want to pass that option to other compilers. Conditional properties allow you to do just that. Their syntax is:

        property ( "," property ) * ":" property

For example, the problem above would be solved by:

exe hello : hello.cpp : <toolset>yfc:<cxxflags>-disable-pointless-warning ;

The syntax also allows several properties in the condition, for example:

exe hello : hello.cpp : <os>NT,<toolset>gcc:<link>static ;

Target identifiers and references

Target identifier is used to denote a target. The syntax is:

target-id -> (project-id | target-name | file-name )
              | (project-id | directory-name) "//" target-name
project-id -> path
target-name -> path
file-name -> path
directory-name -> path

This grammar allows some elements to be recognized as either

project id (at this point, all project ids start with slash).
name of target declared in current Jamfile (note that target names may include slash).
a regular file, denoted by absolute name or name relative to project's sources location.

To determine the real meaning a check is made if project-id by the specified name exists, and then if main target of that name exists. For example, valid target ids might be:

a                                    -- target in current project
lib/b.cpp                            -- regular file
/boost/thread                        -- project "/boost/thread"
/home/ghost/build/lr_library//parser -- target in specific project

Rationale:Target is separated from project by special separator (not just slash), because:

It emphasises that projects and targets are different things.
It allows to have main target names with slashes.

Target reference is used to specify a source target, and may additionally specify desired properties for that target. It has this syntax:

target-reference -> target-id [ "/" requested-properties ]
requested-properties -> property-path

For example,

          exe compiler : compiler.cpp libs/cmdline/<optimization>space ;

would cause the version of cmdline library, optimized for space, to be linked in even if the compiler executable is build with optimization for speed.